Here’s the tube beads I made yesterday! Find them in my SueBeads etsy store!
I’ve stolen a few moments in the past two days and made some tube beads – and there will be more listed tomorrow! Here’s a sampling – you can find them at my SueBeads etsy store!
I’ve recently become enamored with all things seed bead – I love making beaded beads and have gotten into making beaded cabochons thanks to Sally Russick! This is the latest one I have done!
I used a cabochon by Diana Ptaszynski of Suburban Girl Beads – it’s a rustic oval shaped cab with a matte finish.
I made the bail using brick stitch (which I also learned from Sally on her video). I just noticed the little bit of wispy thread I need to burn off!
Finally, I used a brass toggle from Fusion Beads as the closure. It goes really well with the blue seed beads I used.
All in all, I am really happy with this necklace. I’m starting on another using one of my smaller ammonite cabochons. I’ll show you when I get started!
When I posted my necklace design with Jenny’s Component of the Month,
I used kumihimo braid. I make a thin braid with C-lon and didn’t want
to use a bulky end cap, so I decided to figure out how to wire wrap the
ends. Some people were interested in seeing a tutorial on how to do
this, so here it is! The one I made for the piece was a messy wrap –
here I’m going to demonstrate a fairly neat wrap!
tutorial is really similar to any wire wrapping you would do with ball
chain, rhinestone chain, or any material that doesn’t have a clear and
Materials Needed: Kumihimo braid, 6-8″ patinated copper wire
Tools Needed: Two pair chain nose pliers, round nose pliers, wire cutters, embroidery scissors
is the braid and the wire. I think I used 22 gauge wire – it needs to
be strong enough to hold your cord, but workable too!
your wire into the middle of the braid – make sure that you get it in
between strands of the cord, because that will be important to hold your
work. Here you should have a sort piece of wire at the top (maybe 2
inches total), and a longer piece at the bottom for more wraps.
Make a bend in your wire so you basically have a loop. Here you can really see where I inserted the wire.
Take your chain nose pliers and grasp the cord and wire – make sure that the pliers are in between the two sides of wire.
the cord and wire tightly with the chain nose pliers – use your second
pair to start wire wrapping the cord. If you want it neat, make sure
you get the wraps as close together as possible. You can also use your
fingers to do this step – this will result in a more messy wrap.
wrapping until you’re happy with the length of the wrap. You can use
the chain nose pliers to tighten up the wrap and make the loops closer
cut off the braided cord above the loop you made initially with the
wire using embroidery scissors. You can tidy this step up later.
With the round nose pliers, make a wrapped loop with the top section of wire.
the short end of wire down to meet the other wraps you already made –
again, it’s up to you how many wraps you wish to make.
your finished wire wrapped end. Not really too hard! I would use my
thread burner to just tidy up the little pieces of braid that stick out
through the wrap. You can finish your wire any way you want – I like to
hammer the loop to give it some strength and character, the way Deryn
there you have it – another way to finish a kumi braid end without
having to use an end cap! This is also published over at Art Jewelry Elements Blog today!
I wanted to show you all what you can do with my ammonite glass cabochons, so I decided to make myself a necklace!
I used one of my large cabochons (1.5 inches!) and made a beaded bezel from a tutorial from Sally Russick on her blog.
I made a spiral rope from directions from a magazine and a little help from fusion beads – their tutorials provide nice illustrations of what you are supposed to be doing.
I made the bail from Sally’s tutorial. She really did a fantastic job and if you are wanting to give it a try yourself, her tutorial is all videos and very easy to follow. I’m waiting for a magnetic clasp to finish the necklace – the ones I ordered and received today are too small for my comfort!
So, this is one thing you can do with my cabochons. You can also bezel set them (like Patti Vanderbloemen) or glue on a metal bail, or …. who knows what else! What are you doing with cabochons?